According to the characteristics of jewelry inlaid process, the jewelry inlaid process can be divided into five types: tooth inlaid, packet inlaid, group inlaid, combined inlaid and insertion inlaid
1 tooth inlaid The method of tight gem. Can be further divided into claws and straight tooth inlays. Claw setting: It is a traditional method of inlay inlaid. In terms of craftsmanship, the metal teeth are bent down in the direction of the gemstone and "hurry up" the gem. Mainly used for arc -shaped, square, trapezoidal, random gemstone and jade inlaid straight tooth inlaid: it is the inlaid type of modern tooth inlaid. When the metal teeth are inlaid, the gemstone is not bent towards the direction of the gemstone, and it is not bent in the direction of the gemstone, and it is not bent down in the direction of the gemstone, and it does It is a groove card position on the inner car of the tooth to stuck the gemstone. It is mainly used for inlaid of aspect -shaped gemstones such as round diamond -shaped, oval shape (Figure 2). Depending on the number of metal inlaid teeth, the tooth inlaid can be divided into two tooth inlaid, three -toothed, four -toothed, multi -teeth inlaid, etc. The common four tooth inlays; in addition, according to the shape of the inlay, it can be divided into divided into divided into Round tooth inlaid, square tooth inlaid, V -shaped tooth inlaid, etc. This inlaid is a prominent method of prominent gemstone, which can fully expose gems, allows more light to penetrate the gemstone, and increase the fire color of the gemstone. Tourmaline, sea blue gems, emerald, etc. Single -tooth -inlaid -style jewelry is generally small and exquisite, showing Athens, lively and energetic, more suitable for young women to wear.
2 packet inlaid The inlay method surrounded by metal along the gemstone. It can be divided into two types of border packets and infinity packets. There is a metal edge wrap around the gemstone. It is called "stone bowl" in craftsmanship. The metal wrapped around the gem has no ring -shaped edge, which is mainly used for the inlay of small granular gems or auxiliary stones. In addition, according to the size of the wrapped gemstone on the metal edge, it can be divided into all -round inlaid, half -bag inlaid (Figure 4) and tooth bags. The angle, also known as "Baojiao inlaid" is more reliable in pavilion inlaid gemstone, suitable for large granules, expensive, colorful treasure jade stones inlaid, such as large particles of diamonds, curved or saddle -shaped emeralds Wait for the jade ring; but because of the wrap of the metal edge, the light of the gemstone is relatively small, and the area of the gemstone seen is reduced than the rough. Therefore, it is not conducive to more transparent, desire to highlight the fire color, and the gem with smaller granules.
The packets of inlaid styles are thick and heavy, which reflects the rich, generous, stable, dignified characteristics, suitable for men or middle -aged and elderly ladies. 3 group inlaid
is the inlaid method of small granular gemstones (pseudonym). The group inlaid can be divided into grooves, nails, nails and aperture inlays according to the inlaid process. Wait.
1) Glip inlaid: Use metal card groove -like stuck to hold the inlaid method at both ends of the gem waist. Baseds on crushed diamonds such as circular, square, rectangular, trapezoids according to the style. The slot inlaid is more prominent in the decoration, giving people a noble, gorgeous sense of gorgeous 2) nail inlaid: also known as hard inlaid, it is a hand -carved small nail on the metal surface of the jewelry. Method. According to the carved metal nail pattern, it can be divided into triangular nails, square nails, plum blossom nails, pentagram nails, etc. The nail inlaid is very random, and the inlayer can be creatively produced on the jewelry. Strong, but the craftsmanship is mainly carved by hand, the process is difficult and the technical requirements are high.
3) Tooth nail inlaid: It is a mosaic method between the tooth inlaid and nail inlaid. Nail, the effect is the same as the nail inlaid. The tooth nail inlaid overcomes the defects with smaller nails and handicrafts, not full enough, and high technical requirements, but the stones and size have been fixed. : Also known as inlaid and bucket inlaid, the craftsmanship is similar to the packet inlaid. The gems are deeply caught in the ring metal stone bowl. Famous aperture (Figure 9). It can be divided into aperture inlaid and tooth aperture inlaid. The tooth aperture inlaid is on the edge of the metal ring. It is carved with several small metal teeth to inlaid the gem. The gemstone has increased a lot, and the circular aura has a certain decoration. The group inlaid is mostly carried out with tooth inlaid and bag inlaid. Generally, tooth inlaid or packet inlaid is inlaid, and the group inlaid inlaid auxiliary stones (broken diamonds) are lined. The jewelry is gorgeous, noble, rich and powerful. Modern treasure jewelry is basically equipped with group inlaid, especially in some high -end and valuable treasured jewelry, group inlaid has become an indispensable part.
4. Combining inlaid refers to a different inlaid process in the inlaid of the same gem. It can be inlaid in the main stone inlaid, as well as inlaid, such as heart -shaped and water -shaped gemstones. The combination of tooth nail inlaid and inlaid. The combination inlaid can be not restricted to the traditional inlaid format, and the inlaid form changes in many ends, giving people a sense of novel and uniqueness. 5 Inserting
is mainly used in the inlaid of pearls. In the middle of a disc -shaped metal stone bowl, a metal pins are extended vertically, and the metal needle is inserted into the drill with a small hole with a small hole with a small hole In the pearl, inlaid the pearl. There is no obstruction of pearls in setting, highlighting the characteristics of pearls, especially the group inlaid diamonds, and the potential of "pearls and treasures" The embedded process of modern jewelry often changes diverse. The boundless packet inlaid (Figure 13), the wax inlaid process replaced by the wax inlaid, etc., but the changes are inseparable from its ancestors, and the basic craftsmanship remains unchanged. Because of the continuous promotion of the inlaid process, the jewelry market is more vivid and energetic.
According to the characteristics of jewelry inlaid process, the jewelry inlaid process can be divided into five types: tooth inlaid, packet inlaid, group inlaid, combined inlaid and insertion inlaid
1 tooth inlaid
The method of tight gem. Can be further divided into claws and straight tooth inlays.
Claw setting: It is a traditional method of inlay inlaid. In terms of craftsmanship, the metal teeth are bent down in the direction of the gemstone and "hurry up" the gem. Mainly used for arc -shaped, square, trapezoidal, random gemstone and jade inlaid
straight tooth inlaid: it is the inlaid type of modern tooth inlaid. When the metal teeth are inlaid, the gemstone is not bent towards the direction of the gemstone, and it is not bent in the direction of the gemstone, and it is not bent down in the direction of the gemstone, and it does It is a groove card position on the inner car of the tooth to stuck the gemstone. It is mainly used for inlaid of aspect -shaped gemstones such as round diamond -shaped, oval shape (Figure 2). Depending on the number of metal inlaid teeth, the tooth inlaid can be divided into two tooth inlaid, three -toothed, four -toothed, multi -teeth inlaid, etc. The common four tooth inlays; in addition, according to the shape of the inlay, it can be divided into divided into divided into Round tooth inlaid, square tooth inlaid, V -shaped tooth inlaid, etc.
This inlaid is a prominent method of prominent gemstone, which can fully expose gems, allows more light to penetrate the gemstone, and increase the fire color of the gemstone. Tourmaline, sea blue gems, emerald, etc. Single -tooth -inlaid -style jewelry is generally small and exquisite, showing Athens, lively and energetic, more suitable for young women to wear.
2 packet inlaid
The inlay method surrounded by metal along the gemstone. It can be divided into two types of border packets and infinity packets. There is a metal edge wrap around the gemstone. It is called "stone bowl" in craftsmanship. The metal wrapped around the gem has no ring -shaped edge, which is mainly used for the inlay of small granular gems or auxiliary stones. In addition, according to the size of the wrapped gemstone on the metal edge, it can be divided into all -round inlaid, half -bag inlaid (Figure 4) and tooth bags. The angle, also known as "Baojiao inlaid"
is more reliable in pavilion inlaid gemstone, suitable for large granules, expensive, colorful treasure jade stones inlaid, such as large particles of diamonds, curved or saddle -shaped emeralds Wait for the jade ring; but because of the wrap of the metal edge, the light of the gemstone is relatively small, and the area of the gemstone seen is reduced than the rough. Therefore, it is not conducive to more transparent, desire to highlight the fire color, and the gem with smaller granules.
The packets of inlaid styles are thick and heavy, which reflects the rich, generous, stable, dignified characteristics, suitable for men or middle -aged and elderly ladies.
3 group inlaid
is the inlaid method of small granular gemstones (pseudonym). The group inlaid can be divided into grooves, nails, nails and aperture inlays according to the inlaid process. Wait.
1) Glip inlaid: Use metal card groove -like stuck to hold the inlaid method at both ends of the gem waist. Baseds on crushed diamonds such as circular, square, rectangular, trapezoids according to the style. The slot inlaid is more prominent in the decoration, giving people a noble, gorgeous sense of gorgeous
2) nail inlaid: also known as hard inlaid, it is a hand -carved small nail on the metal surface of the jewelry. Method. According to the carved metal nail pattern, it can be divided into triangular nails, square nails, plum blossom nails, pentagram nails, etc. The nail inlaid is very random, and the inlayer can be creatively produced on the jewelry. Strong, but the craftsmanship is mainly carved by hand, the process is difficult and the technical requirements are high.
3) Tooth nail inlaid: It is a mosaic method between the tooth inlaid and nail inlaid. Nail, the effect is the same as the nail inlaid. The tooth nail inlaid overcomes the defects with smaller nails and handicrafts, not full enough, and high technical requirements, but the stones and size have been fixed. : Also known as inlaid and bucket inlaid, the craftsmanship is similar to the packet inlaid. The gems are deeply caught in the ring metal stone bowl. Famous aperture (Figure 9). It can be divided into aperture inlaid and tooth aperture inlaid. The tooth aperture inlaid is on the edge of the metal ring. It is carved with several small metal teeth to inlaid the gem. The gemstone has increased a lot, and the circular aura has a certain decoration.
The group inlaid is mostly carried out with tooth inlaid and bag inlaid. Generally, tooth inlaid or packet inlaid is inlaid, and the group inlaid inlaid auxiliary stones (broken diamonds) are lined. The jewelry is gorgeous, noble, rich and powerful. Modern treasure jewelry is basically equipped with group inlaid, especially in some high -end and valuable treasured jewelry, group inlaid has become an indispensable part.
4. Combining inlaid refers to a different inlaid process in the inlaid of the same gem. It can be inlaid in the main stone inlaid, as well as inlaid, such as heart -shaped and water -shaped gemstones. The combination of tooth nail inlaid and inlaid. The combination inlaid can be not restricted to the traditional inlaid format, and the inlaid form changes in many ends, giving people a sense of novel and uniqueness.
5 Inserting
is mainly used in the inlaid of pearls. In the middle of a disc -shaped metal stone bowl, a metal pins are extended vertically, and the metal needle is inserted into the drill with a small hole with a small hole with a small hole In the pearl, inlaid the pearl. There is no obstruction of pearls in setting, highlighting the characteristics of pearls, especially the group inlaid diamonds, and the potential of "pearls and treasures"
The embedded process of modern jewelry often changes diverse. The boundless packet inlaid (Figure 13), the wax inlaid process replaced by the wax inlaid, etc., but the changes are inseparable from its ancestors, and the basic craftsmanship remains unchanged. Because of the continuous promotion of the inlaid process, the jewelry market is more vivid and energetic.